How To Remove A Bathtub Faucet Handle. Once you locate the screw, use your allen wrench or screwdriver to unscrew it. Lift the faucet handle off of the faucet body, then continue with whatever repairs you need to do.
Once you locate the screw, use your allen wrench or screwdriver to unscrew it. After removing your faucet handle, you should do the following: Next, use your allen wrench to remove the top section of your old faucet.
Use A Handle Puller Unscrew The Handle To Open The Jaws.
If that is the case, use your nail or the flathead screwdriver to pry off the cap gently. After removing your faucet handle, you should do the following: But, if you find any screws, use a screwdriver to remove them.
Small Washers Are Attached To The End Of The Stem With Screws.
Then remove the faucet spout using a hex key. Once you have located the set screw, you will need the right size of the hex wrench to loosen the set screw. Many houses don’t have a separate water line for bathtub faucets.
In The End, You May Need A.
Then apply adequate pressure to remove the handle. Lastly, wipe out the screws from the faucet to remove it from the basin. Try dissolving the scale with vinegar or a commercial scale dissolver.
Use An Allen Wrench Or Small Screwdriver To Remove The Screw Then Carefully Use Your Hand Or Pliers To Remove The Handle Of The Faucet.
Each faucet handle is unique. Luckily, the handle removal process is quite easy. It’s now time to say a fond farewell to your tired, old bathtub faucet.
A Faucet Handle Puller Set
Remove the cap on top of your faucet. As the rod presses against the valve stem the jaws will force the handle off. Begin by removing the moen bathroom faucet handle using a strap wrench.